Clip-in cover with mesh pattern to avoid losing things in the trunk through the open air vents.

Quadlock Smartphone Holder for Renault Zoe Phase 2. Quadlock Gimbal Adapter required

Video: https://youtu.be/bWIgFVrD_X0 <b>All parts in STL here: https://www.redpah.com/product/4553</b> (with a small contribution) The reverse engineering process was not easy, but the result sat

Easy to Print, but let it cool complete down before remove from the bed. Resize to your Printer bed, but stay with “Z” height 0,60mm or more. It should have min 3 layers.   Raw File each part are

This is a Cable hook for the loading cable of the Renault Zoe.

Smaller cans fall over in the car's original cup holder. Can't have that!

A mount for Samsung galaxy tab s6 for Renault Zoe R90/R110/Q90/Q210.

Adds the wireless charging pad back to the Zoe that Renault removed to save costs.

Clip-in cover with honeycomb mesh structure to avoid losing things in the trunk through the open air vents.

Support smartphone pour renault zoe ze 50 personalisé d'après le fichier suivant : https://www.thingiverse.com/thing:4710195

This is a car partȘ I saw my car lost this cap and it cost a lot ” 37,04 euro. So I designed this part to save money. Print filament PET-G Infill 20%

Ich habe eine Weile nach einer guten Halterung für mein Mobiltelefon für die Zoe Ph2 gesucht und irgendwie nichts gefunden, was meinen Gefallen erregt hätte und auch noch preisgünstig gewesen wäre. B

Phone holder Renault ZOE 2019 that replaces lid over ODB contact

Easy to Print, but let it cool complete down before remove from the bed. Resize to your Printer bed, but stay with “Z” height 0,60mm or more. It should have min 3 layers. <strong>Raw File e

Support de téléphone portable pour Renault Zoé. Remix fait deux deux pièces scindées, le support est modifié pour laisser passer le câble. Voir le support de téléphone original pour plus d'infos.

Exact dimensions to insert inside the letter "O" of ZOE. Use a double-sided tape or a small amount of silicone to fix it. To obtain a perfectly polished and smooth result (without manual work), printe

Lining for the hinge to level the sagging door.

One of the things that annoys me the most on the Renault ZOE is the fact that there is no interior courtesy light on the rear. With a baby coming I was scratching my head "how am I going to mount the

The Renault Zoe has an SD card slot right beside the USB port and Line In plug. However, this SD card is only for the navigation system, and not in any way related to the two media ports it is, for re

These are two mounting plates to which any Brodit brand mobile phone holder can be attached, one horizontal and one vertical. Left hand and right hand drive versions are available. Brodit mobile p

This is a cover for the OBD port of a Renault Zoe. It gives easy access to the OBD Port without removing the complete cover.

Phone holder to fit the front tray on the Zoe R135 ZE50. The holder incorporates a usb type C in the centre which…

Remove SD WITHOUT pressing Slide protection Reinsert SD My other ZOE/Z.E. creations: https://www.redpah.com/product/4535 (Cable Flexi Charger holder) https://www.redpah.com/product/4537 (Cab

Cup-/Business card Holder

I found that if I removed the rear seat completely and wound the frond seat right back I can get a ladder in the Zoe, which is handy. However after removing the seat base I found the clips holding it

Ersatzteil für Hutablage-Scharniere für Renault Zoe. Robustes Neudesign, keine Kopie des Orginalteils!

Phone holder to fit the front tray on the Zoe R135 ZE50. The holder incorporates a usb type C in the centre which should fit quite a few phones, the fitting is modeled on the layout in the Tesla mode

Support pour flexicharger Renault Zoe. Imprimer avec supports pour >60° 3 versions. Avec ou sans support de cable pour accrocher au mur. Egalement une version pour s'adapter à la borne greenup legr

For first generation Zoe

Prevent 0.33 l drinks cans from wobbling around in the ZOE drink holder

Modified version of the original Renault Zoe Cable Hook by TTGeek, modified to improve strength: the lower support has been extended, now ending under the

Hook that fits at the not so good original Renault ZOE bag holder.

A simple remix flipped for the right hand drive Zoe. Now updated with the hole in the correct position.

Phone holder for Renault Zoe ZE50. Three parts to print, glue the platen to the base then you will need a right angle…

Secure magnetic Car mount for a cover with a rotatable magnetic clip.

Layer 3/3/3 Tryska 0,3mm výška tisku 0,2mm Podpora NE Materiál PLA Teplota Bed 55 tryska 215/205

If you regularly carry passengers in your Zoe's back seats you may have found a really annoying design flaw where if the third seat belt buckle is clipped onto the designated socket, your passengers w

The rear wiper arm was broken at a car wash. Renault wanted to sell it for €80. They looked at the wrong person as a lefty. 80 grams of PETG is a more reasonable price. Fits diagonally on a stand

For Renault Zoe Rear Seat Support Kit/Hook/Hanger for bottom. Redesigned for better quailty.

Hello fellow Thingyversers. For some reason having a center Armrest on a Renault Zoe isn't a standard option. In fact, I'm not sure if Reno even list it as an option? Anyway, I decided to make

With this hook, you can hang the cables on your Zoe, freeing up trunk floor space and making it more easy to hang the…

Renault Zoe 50 chest covers TPU filament adviced

Replacement parts for Renault Zoe ZE50 front wheel air deflectors. The original parts are impossible to find.

Phone holder for Renault Zoe ZE50. Three parts to print, glue the platen to the base then you will need a right angle USB cable and a couple of small screws to attach the cover. The stand is designe

These are a tried & tested cupholder designs for the Renault Zoe (22 kW and 41 kW versions). As the stock cupholders are very small, I designed an insert that fits snuggly into those but can accommoda

It is more a clone than a remix. I imported the original stl in openscad, and then added cubes and cylinder until the openscad version is undistinguishable from the original version. And then added pa

... on the pictures - the white rund plugs ...to make sure that you lose as little coolant as possible - while removing the BCB charger.

support de téléphone qui prend place dans la fente de carte d'une Renault zoé 1. aucune idée si cela fonctionne sur zoé 2 évite au téléphone de tomber dans les virages

Fix for broken type 2 inlet hinge of Renault Zoe (Q210)